Supports iOS 4.2 devices with Internet connection. Works with HP ePrint-enabled printers and all-in-ones. Requires a wireless connection to the printer. Wireless performance depends on physical environment and distance from access point.

How to set up printer on an iPad?

  • Connect your printer to your Wi-Fi network.
  • Connect your iPad to the same Wi-Fi network as your printer.
  • Tap any AirPrint compatible app.
  • Tap the envelope icon.
  • tap "Print".
  • Tap “Select Printer”.

How to set up Printer on an iphone?

  • Open the app you want to print from. Find the print option by tapping the app's share icon ( or ) or settings icon ( or ). ...
  • Tap (or) Print.
  • Choose an AirPrint-enabled printer.
  • Choose the number of copies.
  • Tap Print.

Connecting your Wireless Printer

  • Unpack your printer.
  • Follow the setup instructions to remove packaging.
  • Plug in the power cord, turn on the printer and install print cartridges. Allow the printer to go through its startup routine, including printing an alignment page (if applicable).
  • Choose one of the connection methods described below. If your printer supports it and you choose an Ethernet (wired) connection, connect it now and skip to installing printer software.

Note: while using an Ethernet connection the printer's wireless system is disabled.

Connection Methods

HP Auto Wireless Connect

HP Auto Wireless Connect is a technology that allows you to connect your printer to your wireless network automatically without having to connect any cables or enter your wireless network settings such as your network name or password.


Install the software for your printer and follow the onscreen instructions.

When prompted, select the "Network (Ethernet/Wireless)" connection type and then choose "Yes, send my wireless settings to the printer (recommended)".


  • Your computer uses Windows Vista (and newer) and Mac OS X 10.5 (and newer).
  • Your computer uses a wireless connection to your network and the operating system is in control of the wireless adapter so that the HP Software can retrieve the computer's current network settings.
  • Your computer is connected to your network over 2.4GHz.

Note: HP Printers are not compatible with 5.0 GHz networks. You may still be able to connect the printer to your network using other setup methods as long as your router also supports 2.4GHz (as most do).

  • Your computer does not use a static IP address..
  • Your printer is in HP Auto Wireless Connect mode.


If HP Auto Wireless Connect is offered during the installation of your printer, it is the recommended setup method. During this time you will not have Internet access. Be sure to save any online work and/or downloads before continuing with this setup method.

If HP Auto Wireless Connect is not offered during the software installation or if it is not successful, you will be guided to use another wireless setup method.

Wi-Fi Protected Setup

WPS connect devices together over a wireless connection.

WPS Pushbutton method


  • Both your printer and wireless router must support WPS pushbutton mode. Consult your printer and wireless router manuals.
  • The wireless router must have a physical WPS pushbutton available.
  • Your network must use WPA or WPA2 security. Most WPS wireless routers will not connect using the WPS method if WEP or no security is used.
  • Most WPS wireless routers will not connect using the WPS method if you are using the manufacturer’s default for the network name and no security.

Connect your Wireless Printer to your wireless router using WPS

  • Start the WPS pushbutton mode on your printer.
  • For instructions on starting WPS on your printer, consult your printer's manual.
  • Within 2 minutes, press the WPS button on your router.

HP Wireless Setup Wizard(with display)

This wizard runs from your printer’s control panel.

  • Make sure you know your network name and your security password (WEP, WPA, or WPA2).
  • On the printer's control panel, go to the Network menu or touch the wireless icon and then go to settings. Select Wireless Setup Wizard. The Wireless Setup Wizard displays a list of wireless networks in the area.

Note: Settings may be accessed by touching a wrench icon, depending on the product model.

  • If you don't see your wireless network listed, you can enter your network name manually by scrolling to the bottom of the list. If you enter the name manually it must be exact, including upper and lower case characters.
  • Enter your WEP key or WPA passphrase. You must enter the key or passphrase exactly, including upper and lower case characters. Your printer should connect to your wireless network. If it does not connect, you are given the opportunity to print a Wireless Network Test report that will help you find out what may be wrong.

USB Setup of Wireless (without display)

Printers without a touch display can use this wireless setup method during the printer software installation

  • You will temporarily connect a USB cable between the computer and the printer.
  • It's important that you connect and disconnect the cable only when prompted by the software, which will guide you through configuring your printer's wireless connection.

Note: Settings may be accessed by touching a wrench icon, depending on the product model.

  • Software may automatically find your wireless settings for you in some cases.

The Fastest Way To Fix Your Printer Issue Is Just A Click Away . . . Click To Call

Call - 1-866-417-9719

internet phone service